R Series Bike Racks

R-3-F-P
R Rack, 3 Locking Loops, Flanged Surface Mount T.G.I.C. Polyester Powder Coat.


Manufacturing Process
Racks shall be fabricated using a hydraulic pipe bending machine.

Height
Racks shall stand 36” tall.

Size
Designate the number of locking loops after the model number.

Material
Locking Loops
Locking loops shall be fabricated from one of the following materials: 1-5/8” O.D. (.140 wall), 1.9 O.D. (.145 wall), or 2-3/8” O.D. (.154 wall) Schedule 40 round steel pipe or 2” O.D. (.188 wall) square structural and mechanical steel tube. Designate “-158”, “-190”, “-238” or “-200” after the size designation for the material requested.

Base Rails
Base rails shall be fabricated from either solid steel flat bar or steel channel. Designate “-FB” or “-SC” after the material designation for either flat bar or steel channel.

Mounting
Embedded or Surface Flanged Mounted. Please designate either “-E” or “-F” after the finish option for either an embedded or surface flange mount respectively.

Finish
Hot dipped galvanized
Designate “-G” after the mounting designation Racks shall be hot dipped galvanized subsequent to fabrication and hand filed to remove any flash.

Polyester Powder Coated
Designate “-P” after the mounting designation nce fabricated, racks will be shot blast to a near white, cleaned, and electrostatically powder coated with a TGIC polyester powder coating.

Stainless Steel
Designate “-SS” after the mounting designation satin finish.

NOTE: SINGLE LOOP RACKS CAN ALSO BE PROVIDED WHICH ARE SIMILAR TO AN INVERTED “U” STYLE RACK.



Model

Length

RR 2

34”

RR 3

66”

RR 4

98”

RR 5

130”

RR 6

162”

RR 7

194”

NOTE: SPACING IN BETWEEN RACKS CAN BE CHANGED UPON REQUEST.

Creative Pipe, Inc.
Copyright © MMXV. All Rights Reserved. 
Created by Antigua Web Designs.