Light Rail Plastic Bollard: Models CBR-LR™ Series - Patent Pending
CBR-LR-5-P-E-2
Light Rail Round Bollard, 5" O.D., Plastic Construction, Embedded, 2 Eyelets.


CBR-LR-5-P-E-1-2B
Light Rail Round Bollard, 5" O.D., Plastic Construction, Embedded, 1 Eyelet and 2 Custom Steel Tubing Ears.


CBR-LR-5-P-E-1-2B
Light Rail Round Bollard, 5" O.D., Plastic Construction, Embedded, 1 Eyelet and 2 Custom Steel Tubing Ears.

CBR-LR Series
Light Rail Series Bollards.

CBR-LR Series
Light Rail Series Bollards.

Our specially designed Light Rail Model bollard was initially designed for the Tri-Met Light Rail System in Portland, Oregon. Since light rail systems use electricity to operate, we needed to design a bollard and chain combination that would discourage pedestrians from walking across the tracks but that would also not conduct electricity if one of the overhead light rail wires happened to fall on the bollard/chain. Our solution was a bollard made up of plastic construction connected by heavy duty plastic chain and master links. This system, unlike a conventional steel bollard and chain system, virtually ensures that the bollards and chain will not act as conductors of electricity if one of the electrical lines ever happens to fall and make contact with them.



Height
The overall height of the bollard shall be 52” with 6” below grade and 46” above grade (NOTE: Overall height can be adjusted).

Material
INNER CORE

4” O.D. recycled plastic.

INNER SLEEVE
4” I.D. x 11 gauge extruded aluminum tubing (NOTE: Aluminum tubing is 32” in overall length and extends 27” above grade and 5” below grade) .

OUTER SLEEVE
4-3/4” O.D., U.V. stabililized rotationally molded polyethylene

CHAIN
4” black plastic links with a 700 pound tensile strength.

MASTERLINKS
4” black plastic masterlinks.

EYEBOLTS
1/2” diameter steel with insulating thermoplastic powder coat finish.

Installation
STANDARD EMBEDDED MOUNT
Bollards shall be embedded 6” below grade. Bollards shall have a cross anchor for support. This cross anchor shall be positioned 1” from the bottom of the bollard and shall extend approximately ¾” on either side of the bollard.


Similar Products
 
Creative Bollards-CBRTM and CBSQTM Series
Bollards - Recycled Plastic Construction
Eliminator Removable Embedded Bollard with Internal Locking Mechanism, ELBR or ELBSQ
Click here to view the El Sol Solar Lighted Bollards, Model ESBSQ
El Sol Solar Lighted Bollards, Model ESBSQ
Click here to view the Evanstan Decorative Bollards - EVBR Series Evanstan Decorative Bollards - EVBR Series
Click here to view Faux Wood Bollards, Model FWB
Faux Wood Bollards, Model FWB
Click here to view the I-Beam Bollard - Model IBB
The I-Beam Bollard - Model IBB
Bollards-Light Rail Models, CBR-LR Series
Pawn Bollard, PAB
Click here to view the Swirl Bollard, Model SWB
Swirl Bollard, Model SWB
 

Creative Pipe, Inc.
Copyright © MMXV. All Rights Reserved. 
Created by Antigua Web Designs.